Heat Plus Standart SPN-308 - 80 cm - Heat Plus https://heatplus.ua/en Infrared heating systems Tue, 13 Aug 2024 16:10:19 +0000 en-US hourly 1 https://wordpress.org/?v=6.5.5 https://heatplus.ua/wp-content/uploads/2018/10/favicon.png Heat Plus Standart SPN-308 - 80 cm - Heat Plus https://heatplus.ua/en 32 32 Heat Plus Standart SPN-308-180 https://heatplus.ua/en/produkcija/infrakrasnaja-plenka/heat-plus-standart/heat-plus-standart-spn-308/heat-plus-standart-spn-308-180/ https://heatplus.ua/en/produkcija/infrakrasnaja-plenka/heat-plus-standart/heat-plus-standart-spn-308/heat-plus-standart-spn-308-180/#respond Mon, 20 Aug 2018 18:23:41 +0000 http://heatplus.havrylovski.com.ua/?p=1526 Bestseller Bestseller Bestseller Bestseller Infrared film SPN-308-186 - medium-temperature heating carbon film from HEAT PLUS ™. It is used as a heating element in systems of warm floors for the following types of floor coverings: laminate linoleum parquet board carpet cement screed +50°Сmax 225W/sq.m. 80 cmwidth 20 cmsection 220 V50 Hz other product variants Power, […]

The post Heat Plus Standart SPN-308-180 first appeared on Heat Plus.

]]>
Bestseller
#
Bestseller
#
Bestseller
#
Bestseller
#
#
#
#
#

Infrared film SPN-308-186 - medium-temperature heating carbon film from HEAT PLUS ™. It is used as a heating element in systems of warm floors for the following types of floor coverings:

  • laminate
  • linoleum
  • parquet board
  • carpet
  • cement screed
  • +50°Сmax
  • 225W/sq.m.
  • 80 cmwidth
  • 20 cmsection
  • 220 V50 Hz

other product variants

Power, W/linear.

characteristics

Power, W/linear. 220
Max. heating temperature,°С 50
Collection Infrared floor under the laminate
Type Standart
Application of the carbon layer By bands
Operating voltage, V 220
Efficiency, % 92

other product variants

Power, W/linear.

characteristics

Power, W/m2. 225
Max. heating temperature,°С 50
Collection Infrared floor under the laminate
Type Standart
Application of the carbon layer By bands
Operating voltage, V 220
Efficiency, % 92

description

Infrared film SPN-308-180 - is a mid-temperature carbon heating element. It is produced by applying a carbon paste on polyethylene terephthalate.

The famous Heat Plus brand produces high-quality infrared film in South Korea. The products of this brand fully meet the standard requirements in the world. There is a certificate permitting the use of Heat Plus products in the Ukrainian territory. The film of the IR model SPN-308-180 is used for a warm floor. It is best suited for installation under parquet, linoleum, laminate, as well as for cement screed.

characteristics

main

Max power 220 W/m2 ± 10%
Working temperature 35-40 t, °С
Efficiency, % 92
unit of measurement linear meter
Cutting is a multiple of 20 cm in length
Width 0,8 m
Film thickness 0,338 mm
In a roll 100 m
Roll weight 38 kg
Type of film Standard, uncoated, striped
Type of heating Basic, additional
Guarantee 15 years
Lifetime 50 years
Composition Polyethylene terephthalate (PET), copper conductor, carbon (carbon bands), polyethylene (PE)

others

Collection Infrared floor under the laminate
Product of South Korea
Manufacturer HEAT PLUS
Guarantee 15 yeaes
Vendor code 310000

film structure heat plus

#
  • polyethylene terephthalate
  • copper tires
  • silver tires
  • carbon bands
  • polyethylene terephthalate

features of the infrared film heat plus

  • The material consists of 5 layers;
  • It is heated to 50 degrees;
  • Melting occurs at 160 degrees;
  • The sections, of which the film consists, have a width of 0.2 m.
  • On the material there are transparent areas that do not warm up. In these places, the heating cover is mounted to the surfaces;
  • Infrared film can be laid under any cover including under the screed;
  • The material has a high level of reliability at average market value.

technology of using infrared film spn-308-180

The heating material is arranged in such a way that heat can spread both upward and downward. In order to not waste energy in vain, a layer of thermal insulation (a substrate) is laid under the material. In our store you can buy branded thermal insulation materials, which you can see in the catalog of goods.

#
  • carbon conductor
  • polyethylene terephthalate
  • silver tire
  • copper bus

the heating film spn-308-180 is used for the following purposes

  • Arrangement of a warm floor;
  • Equipment of additional heating systems in the premises;
  • Heated walls, loggias, balconies;
  • Systems of heating of agricultural buildings, devices for growing plants;
  • Organization of heating in pavilions, shops, kiosks, garages, etc .;
  • Ceiling heating device .;

installation of infrared film spn-308-180

It is carried out in accordance with the instructions in the instructions that are attached to the material. For installation, the accompanying materials are used - thermal insulation substrate, protective coating, etc.

The thickness of all layers is different. It depends on the features of the finish material:

  • For parquet and laminate flooring - 0.45 cm.
  • Under the linoleum, carpet - 0.65 cm
  • Under the cement screed - 0,22 cm

materials required for installation of a floor heating system

when working with infrared film, safety measures should be followed

forbidden

  • To install at an air humidity above 70%, and also on wet surfaces
  • You can not use as a thermal insulation substrate, covered with foil of aluminum, metal
  • It is forbidden to mount an infrared film on the surface of metal, polystyrene foam, polystyrene, mineral wool, textiles
  • Make material kinks in the 0.5 m section by the value of the right angle or to the kink
  • It is impossible to impose an infrared film in two layers, to cross the cloths
  • Also, infrared film is prohibited from cutting in unauthorized places and placing heavy, sharp objects on it

The post Heat Plus Standart SPN-308-180 first appeared on Heat Plus.

]]> https://heatplus.ua/en/produkcija/infrakrasnaja-plenka/heat-plus-standart/heat-plus-standart-spn-308/heat-plus-standart-spn-308-180/feed/ 0 Heat Plus Standart SPN-308-120 https://heatplus.ua/en/produkcija/infrakrasnaja-plenka/heat-plus-standart/heat-plus-standart-spn-308/heat-plus-standart-spn-308-120/ https://heatplus.ua/en/produkcija/infrakrasnaja-plenka/heat-plus-standart/heat-plus-standart-spn-308/heat-plus-standart-spn-308-120/#respond Mon, 20 Aug 2018 18:22:54 +0000 http://heatplus.havrylovski.com.ua/?p=1524 Bestseller Bestseller Bestseller Bestseller Infrared film SPN-308-120 - medium-temperature heating carbon film from HEAT PLUS ™. It is used as a heating element in systems of warm floors for the following types of floor coverings: laminate linoleum parquet board carpet cement screed +50°Сmax 150W/sq.m. 80 cmwidth 20 cmsection 220 V50 Hz other product variants Power, […]

The post Heat Plus Standart SPN-308-120 first appeared on Heat Plus.

]]>
Bestseller
#
Bestseller
#
Bestseller
#
Bestseller
#
#
#
#
#

Infrared film SPN-308-120 - medium-temperature heating carbon film from HEAT PLUS ™. It is used as a heating element in systems of warm floors for the following types of floor coverings:

  • laminate
  • linoleum
  • parquet board
  • carpet
  • cement screed
  • +50°Сmax
  • 150W/sq.m.
  • 80 cmwidth
  • 20 cmsection
  • 220 V50 Hz

other product variants

Power, W/linear.

characteristics

Power, W/linear. 120
Max. heating temperature,°С 50
Collection Infrared floor under the laminate
Type Standart
Application of the carbon layer By bands
Operating voltage, V 220
Efficiency, % 92

other product variants

Power, W/m2.

characteristics

Power, W/m2. 150
Max. heating temperature,°С 50
Collection Infrared floor under the laminate
Type Standart
Application of the carbon layer By bands
Operating voltage, V 220
Efficiency, % 92

description

Infrared film SPN-308-120 - is a mid-temperature carbon heating element. It is produced by applying a carbon paste on polyethylene terephthalate.

The famous Heat Plus brand produces high-quality infrared film in South Korea. The products of this brand fully meet the standard requirements in the world. There is a certificate permitting the use of Heat Plus products in the Ukrainian territory. The film of the IR model SPN-308-120 is used for a warm floor. It is best suited for installation under parquet, linoleum, laminate, as well as for cement screed.

characteristics

main

Max power 120 W/m2 ± 10%
Working temperature 30-40 t, °С
Efficiency, % 92
unit of measurement linear meter
Cutting is a multiple of 20 cm in length
Width 0,8 m
Film thickness 0,338 mm
In a roll 100 m
Roll weight 38 kg
Type of film Standard, uncoated, striped
Type of heating Basic, additional
Guarantee 15 years
Lifetime 50 years
Composition Polyethylene terephthalate (PET), copper conductor, carbon (carbon bands), polyethylene (PE)

others

Collection Infrared floor under the laminate
Product of South Korea
Manufacturer HEAT PLUS
Guarantee 15 yeaes
Vendor code 310000

film structure heat plus

#
  • polyethylene terephthalate
  • copper tires
  • silver tires
  • carbon bands
  • polyethylene terephthalate

features of the infrared film heat plus

  • The material consists of 5 layers;
  • It is heated to 50 degrees;
  • Melting occurs at 160 degrees;
  • The sections, of which the film consists, have a width of 0.2 m.
  • On the material there are transparent areas that do not warm up. In these places, the heating cover is mounted to the surfaces;
  • Infrared film can be laid under any cover including under the screed;
  • The material has a high level of reliability at average market value.

technology of using infrared film spn-308-120

The heating material is arranged in such a way that heat can spread both upward and downward. In order to not waste energy in vain, a layer of thermal insulation (a substrate) is laid under the material. In our store you can buy branded thermal insulation materials, which you can see in the catalog of goods.

#
  • carbon conductor
  • polyethylene terephthalate
  • silver tire
  • copper bus

the heating film spn-308-120 is used for the following purposes

  • Arrangement of a warm floor;
  • Equipment of additional heating systems in the premises;
  • Heated walls, loggias, balconies;
  • Systems of heating of agricultural buildings, devices for growing plants;
  • Organization of heating in pavilions, shops, kiosks, garages, etc .;
  • Ceiling heating device .;

installation of infrared film spn-308-120

It is carried out in accordance with the instructions in the instructions that are attached to the material. For installation, the accompanying materials are used - thermal insulation substrate, protective coating, etc.

The thickness of all layers is different. It depends on the features of the finish material:

  • For parquet and laminate flooring - 0.45 cm.
  • Under the linoleum, carpet - 0.65 cm
  • Under the cement screed - 0,22 cm

materials required for installation of a floor heating system

when working with infrared film, safety measures should be followed

forbidden

  • To install at an air humidity above 70%, and also on wet surfaces
  • You can not use as a thermal insulation substrate, covered with foil of aluminum, metal
  • It is forbidden to mount an infrared film on the surface of metal, polystyrene foam, polystyrene, mineral wool, textiles
  • Make material kinks in the 0.5 m section by the value of the right angle or to the kink
  • It is impossible to impose an infrared film in two layers, to cross the cloths
  • Also, infrared film is prohibited from cutting in unauthorized places and placing heavy, sharp objects on it

The post Heat Plus Standart SPN-308-120 first appeared on Heat Plus.

]]> https://heatplus.ua/en/produkcija/infrakrasnaja-plenka/heat-plus-standart/heat-plus-standart-spn-308/heat-plus-standart-spn-308-120/feed/ 0 Heat Plus Standart SPN-308-096 https://heatplus.ua/en/produkcija/infrakrasnaja-plenka/heat-plus-standart/heat-plus-standart-spn-308/heat-plus-standart-spn-308-096/ https://heatplus.ua/en/produkcija/infrakrasnaja-plenka/heat-plus-standart/heat-plus-standart-spn-308/heat-plus-standart-spn-308-096/#respond Sun, 19 Aug 2018 16:13:33 +0000 http://heatplus.havrylovski.com.ua/?p=1407 Bestseller Bestseller Bestseller Bestseller Скачать инструкцию Infrared film SPN-308-096 - medium-temperature heating carbon film from HEAT PLUS ™. It is used as a heating element in systems of warm floors for the following types of floor coverings: laminate linoleum parquet board carpet cement screed +50°Сmax 120W/sq.m. 80 cmwidth 20 cmsection 220 V50 Hz other product […]

The post Heat Plus Standart SPN-308-096 first appeared on Heat Plus.

]]>
Bestseller
#
Bestseller
#
Bestseller
#
Bestseller
#
#
#
#
#

Infrared film SPN-308-096 - medium-temperature heating carbon film from HEAT PLUS ™. It is used as a heating element in systems of warm floors for the following types of floor coverings:

  • laminate
  • linoleum
  • parquet board
  • carpet
  • cement screed
  • +50°Сmax
  • 120W/sq.m.
  • 80 cmwidth
  • 20 cmsection
  • 220 V50 Hz

other product variants

Power, W/linear.

characteristics

Power, W/linear. 96
Max. heating temperature,°С 50
Collection Infrared floor under the laminate
Type Standart
Application of the carbon layer By bands
Operating voltage, V 220
Efficiency, % 92

other product variants

Power, W/linear.

characteristics

Power, W/m2. 120
Max. heating temperature,°С 50
Collection Infrared floor under the laminate
Type Standart
Application of the carbon layer By bands
Operating voltage, V 220
Efficiency, % 92

description

Infrared film SPN-308-096 - is a mid-temperature carbon heating element. It is produced by applying a carbon paste on polyethylene terephthalate.

The famous Heat Plus brand produces high-quality infrared film in South Korea. The products of this brand fully meet the standard requirements in the world. There is a certificate permitting the use of Heat Plus products in the Ukrainian territory. The film of the IR model SPN-308-096 is used for a warm floor. It is best suited for installation under parquet, linoleum, laminate, as well as for cement screed.

characteristics

main

Max power 60 W/m2 ± 10%
Working temperature 25-30 t, °С
Efficiency, % 92
unit of measurement linear meter
Cutting is a multiple of 20 cm in length
Width 0,8 m
Film thickness 0,338 mm
In a roll 100 m
Roll weight 38 kg
Type of film Standard, uncoated, striped
Type of heating Basic, additional
Guarantee 15 years
Lifetime 50 years
Composition Polyethylene terephthalate (PET), copper conductor, carbon (carbon bands), polyethylene (PE)

others

Collection Infrared floor under the laminate
Product of South Korea
Manufacturer HEAT PLUS
Guarantee 15 yeaes
Vendor code 310000

film structure heat plus

#
  • polyethylene terephthalate
  • copper tires
  • silver tires
  • carbon bands
  • polyethylene terephthalate

features of the infrared film heat plus

  • The material consists of 5 layers;
  • It is heated to 50 degrees;
  • Melting occurs at 160 degrees;
  • The sections, of which the film consists, have a width of 0.2 m.
  • On the material there are transparent areas that do not warm up. In these places, the heating cover is mounted to the surfaces;
  • Infrared film can be laid under any cover including under the screed;
  • The material has a high level of reliability at average market value.

technology of using infrared film spn-308-096

The heating material is arranged in such a way that heat can spread both upward and downward. In order to not waste energy in vain, a layer of thermal insulation (a substrate) is laid under the material. In our store you can buy branded thermal insulation materials, which you can see in the catalog of goods.

#
  • carbon conductor
  • polyethylene terephthalate
  • silver tire
  • copper bus

the heating film spn-308-096 is used for the following purposes

  • Arrangement of a warm floor;
  • Equipment of additional heating systems in the premises;
  • Heated walls, loggias, balconies;
  • Systems of heating of agricultural buildings, devices for growing plants;
  • Organization of heating in pavilions, shops, kiosks, garages, etc .;
  • Ceiling heating device .;

installation of infrared film spn-308-096

It is carried out in accordance with the instructions in the instructions that are attached to the material. For installation, the accompanying materials are used - thermal insulation substrate, protective coating, etc.

The thickness of all layers is different. It depends on the features of the finish material:

  • For parquet and laminate flooring - 0.45 cm.
  • Under the linoleum, carpet - 0.65 cm
  • Under the cement screed - 0,22 cm

materials required for installation of a floor heating system

when working with infrared film, safety measures should be followed

forbidden

  • To install at an air humidity above 70%, and also on wet surfaces
  • You can not use as a thermal insulation substrate, covered with foil of aluminum, metal
  • It is forbidden to mount an infrared film on the surface of metal, polystyrene foam, polystyrene, mineral wool, textiles
  • Make material kinks in the 0.5 m section by the value of the right angle or to the kink
  • It is impossible to impose an infrared film in two layers, to cross the cloths
  • Also, infrared film is prohibited from cutting in unauthorized places and placing heavy, sharp objects on it

The post Heat Plus Standart SPN-308-096 first appeared on Heat Plus.

]]> https://heatplus.ua/en/produkcija/infrakrasnaja-plenka/heat-plus-standart/heat-plus-standart-spn-308/heat-plus-standart-spn-308-096/feed/ 0