Heat Plus Standart SPN-310 - 100 cm - Heat Plus https://heatplus.ua/en Infrared heating systems Tue, 20 Aug 2024 13:57:10 +0000 en-US hourly 1 https://wordpress.org/?v=6.5.5 https://heatplus.ua/wp-content/uploads/2018/10/favicon.png Heat Plus Standart SPN-310 - 100 cm - Heat Plus https://heatplus.ua/en 32 32 Heat Plus Standart SPN-310-220 https://heatplus.ua/en/produkcija/infrakrasnaja-plenka/heat-plus-standart/heat-plus-standart-spn-310/heat-plus-standart-spn-310-220/ https://heatplus.ua/en/produkcija/infrakrasnaja-plenka/heat-plus-standart/heat-plus-standart-spn-310/heat-plus-standart-spn-310-220/#respond Sat, 25 Aug 2018 22:27:37 +0000 http://heatplus.havrylovski.com.ua/?p=1862 Bestseller Bestseller Bestseller Bestseller Heat Plus Standart film is used as a heating element in heating, heating and warm floors. In combination with other materials TM Heat Plus, it is ideal for laying under light coatings (linoleum, laminate, carpet, parquet, etc.). Also, it is possible to use a film under the screed, for laying heavy […]

The post Heat Plus Standart SPN-310-220 first appeared on Heat Plus.

]]>
Bestseller
#
Bestseller
#
Bestseller
#
Bestseller
#
#
#
#
#

Heat Plus Standart film is used as a heating element in heating, heating and warm floors. In combination with other materials TM Heat Plus, it is ideal for laying under light coatings (linoleum, laminate, carpet, parquet, etc.). Also, it is possible to use a film under the screed, for laying heavy coatings (tiles, marble, etc.).

  • laminate
  • linoleum
  • parquet board
  • carpet
  • cement screed
  • +50°Сmax
  • 220W/sq.m.
  • 100 cmwidth
  • 20 cmsection
  • 220 V50 Hz

other product variants

Power, W/linear.

characteristics

Power, W/linear. 220
Max. heating temperature,°С 50
Collection Infrared floor under the laminate
Type Standart
Application of the carbon layer By bands
Operating voltage, V 220
Efficiency, % 92

other product variants

Power, W/m2.

characteristics

Power, W/m2. 220
Max. heating temperature,°С 50
Collection Infrared floor under the laminate
Type Standart
Application of the carbon layer By bands
Operating voltage, V 220
Efficiency, % 92

description

The minimum width in the standard film class is 100 cm. The maximum size in width in the class of standard films is used to heat the area of regular shapes. The use of a film of this standard width makes it possible to reduce the number of joints. The maximum film thickness is 220 W / m. This film is used to compensate for high heat losses in the room. The principle of the Heat Plus Standart heating film is based on the conversion of electrical energy into thermal infrared radiation. The key role in this process is played by the carbon layer, which serves as a converter of electricity to heat. The heating film does not heat the air, but the surrounding objects (floor, walls, furniture ...), which, subsequently, give their warmth to the air. During operation, the system does not burn oxygen, does not pollute the air and has a favorable effect on the microclimate in the room. People who are in the room where the Heat Plus Standart heating system is installed, always feel warm and comfortable thanks to not only the heat, but also the process of ionizing the air with film, due to the silver layer. The efficiency of a film-based heating system is more than 90% - this means that with the same energy consumption you get more heat than from any other heating systems. This is achieved by eliminating losses during the transfer of energy from the source to the heat radiator. Direct heating of the floor covering and surrounding objects, creates a comfortable temperature layer for human stay and reduces the need to heat the entire volume of air, in contrast to convection systems. Heat Plus infrared heating film consists of safe and environmentally friendly materials and is a film with a thickness of only 0.338 mm, consisting of 5 technological layers (unlike analogues, which consist of 2-3 layers). Carbon strips are united in sections of 20 cm in length. Carbon layer with a plasticizer is homogeneous, with great accuracy, applied to a PE (polyester) substrate. Overheating on films with a high specific power is eliminated. The most important part in the construction of the infrared film is the place of contact between the current carrying copper bus and the carbon heating layer. Reliable contact is provided by a silver tire, which completely covers the area of the copper conductor and ensures the absence of an air gap. Due to the high quality of the copper conductor, the lowest contact resistance (0.1 Om) is achieved.

characteristics

main

Max power 220 W/m2 ± 10%
Working temperature 35-40 t, °С
Efficiency, % 92
unit of measurement linear meter
Cutting is a multiple of 20 cm in length
Width 1,0 m
Film thickness 0,338 mm
In a roll 100 m
Roll weight 48 kg
Type of film Standard, uncoated, striped
Type of heating Basic, additional
Guarantee 15 years
Lifetime 50 years
Composition Polyethylene terephthalate (PET), copper conductor, carbon (carbon bands), polyethylene (PE)

others

Collection Infrared floor under the laminate
Product of South Korea
Manufacturer HEAT PLUS
Guarantee 15 yeaes
Vendor code 310000

film structure heat plus

#
  • polyethylene terephthalate
  • copper tires
  • silver tires
  • carbon bands
  • polyethylene terephthalate

features of the infrared film heat plus

  • The material consists of 5 layers;
  • It is heated to 50 degrees;
  • Melting occurs at 160 degrees;
  • The sections, of which the film consists, have a width of 0.2 m.
  • On the material there are transparent areas that do not warm up. In these places, the heating cover is mounted to the surfaces;
  • Infrared film can be laid under any cover including under the screed;
  • The material has a high level of reliability at average market value.

technology of using infrared film spn-310-220

The heating material is arranged in such a way that heat can spread both upward and downward. In order to not waste energy in vain, a layer of thermal insulation (a substrate) is laid under the material. In our store you can buy branded thermal insulation materials, which you can see in the catalog of goods.

#
  • carbon conductor
  • polyethylene terephthalate
  • silver tire
  • copper bus

the heating film spn-310-220 is used for the following purposes

  • Arrangement of a warm floor;
  • Equipment of additional heating systems in the premises;
  • Heated walls, loggias, balconies;
  • Systems of heating of agricultural buildings, devices for growing plants;
  • Organization of heating in pavilions, shops, kiosks, garages, etc .;
  • Ceiling heating device .;

installation of infrared film spn-310-220

It is carried out in accordance with the instructions in the instructions that are attached to the material. For installation, the accompanying materials are used - thermal insulation substrate, protective coating, etc.

The thickness of all layers is different. It depends on the features of the finish material:

  • For parquet and laminate flooring - 0.45 cm.
  • Under the linoleum, carpet - 0.65 cm
  • Under the cement screed - 0,22 cm

materials required for installation of a floor heating system

when working with infrared film, safety measures should be followed

forbidden

  • To install at an air humidity above 70%, and also on wet surfaces
  • You can not use as a thermal insulation substrate, covered with foil of aluminum, metal
  • It is forbidden to mount an infrared film on the surface of metal, polystyrene foam, polystyrene, mineral wool, textiles
  • Make material kinks in the 0.5 m section by the value of the right angle or to the kink
  • It is impossible to impose an infrared film in two layers, to cross the cloths
  • Also, infrared film is prohibited from cutting in unauthorized places and placing heavy, sharp objects on it

The post Heat Plus Standart SPN-310-220 first appeared on Heat Plus.

]]> https://heatplus.ua/en/produkcija/infrakrasnaja-plenka/heat-plus-standart/heat-plus-standart-spn-310/heat-plus-standart-spn-310-220/feed/ 0 Heat Plus Standart SPN-310-150 https://heatplus.ua/en/produkcija/infrakrasnaja-plenka/heat-plus-standart/heat-plus-standart-spn-310/heat-plus-standart-spn-310-150/ https://heatplus.ua/en/produkcija/infrakrasnaja-plenka/heat-plus-standart/heat-plus-standart-spn-310/heat-plus-standart-spn-310-150/#respond Sat, 25 Aug 2018 22:20:26 +0000 http://heatplus.havrylovski.com.ua/?p=1856 Bestseller Bestseller Bestseller Bestseller Heat Plus Standart film is used as a heating element in heating, heating and warm floors. In combination with other materials TM Heat Plus, it is ideal for laying under light coatings (linoleum, laminate, carpet, parquet, etc.). Also, it is possible to use a film under the screed, for laying heavy […]

The post Heat Plus Standart SPN-310-150 first appeared on Heat Plus.

]]>
Bestseller
#
Bestseller
#
Bestseller
#
Bestseller
#
#
#
#
#

Heat Plus Standart film is used as a heating element in heating, heating and warm floors. In combination with other materials TM Heat Plus, it is ideal for laying under light coatings (linoleum, laminate, carpet, parquet, etc.). Also, it is possible to use a film under the screed, for laying heavy coatings (tiles, marble, etc.).

  • laminate
  • linoleum
  • parquet board
  • carpet
  • cement screed
  • +50°Сmax
  • 150W/sq.m.
  • 100 cmwidth
  • 20 cmsection
  • 220 V50 Hz

other product variants

Power, W/linear.

characteristics

Power, W/linear. 150
Max. heating temperature,°С 50
Collection Infrared floor under the laminate
Type Standart
Application of the carbon layer By bands
Operating voltage, V 220
Efficiency, % 92

other product variants

Power, W/m2.

characteristics

Power, W/m2. 150
Max. heating temperature,°С 50
Collection Infrared floor under the laminate
Type Standart
Application of the carbon layer By bands
Operating voltage, V 220
Efficiency, % 92

description

The minimum width in the standard film class is 100 cm. The maximum size in width in the class of standard films is used to heat the area of regular shapes. The use of a film of this standard width makes it possible to reduce the number of joints. The maximum film thickness is 150 W / m. This film is used to compensate for high heat losses in the room. The principle of the Heat Plus Standart heating film is based on the conversion of electrical energy into thermal infrared radiation. The key role in this process is played by the carbon layer, which serves as a converter of electricity to heat. The heating film does not heat the air, but the surrounding objects (floor, walls, furniture ...), which, subsequently, give their warmth to the air. During operation, the system does not burn oxygen, does not pollute the air and has a favorable effect on the microclimate in the room. People who are in the room where the Heat Plus Standart heating system is installed, always feel warm and comfortable thanks to not only the heat, but also the process of ionizing the air with film, due to the silver layer. The efficiency of a film-based heating system is more than 90% - this means that with the same energy consumption you get more heat than from any other heating systems. This is achieved by eliminating losses during the transfer of energy from the source to the heat radiator. Direct heating of the floor covering and surrounding objects, creates a comfortable temperature layer for human stay and reduces the need to heat the entire volume of air, in contrast to convection systems. Heat Plus infrared heating film consists of safe and environmentally friendly materials and is a film with a thickness of only 0.338 mm, consisting of 5 technological layers (unlike analogues, which consist of 2-3 layers). Carbon strips are united in sections of 20 cm in length. Carbon layer with a plasticizer is homogeneous, with great accuracy, applied to a PE (polyester) substrate. Overheating on films with a high specific power is eliminated. The most important part in the construction of the infrared film is the place of contact between the current carrying copper bus and the carbon heating layer. Reliable contact is provided by a silver tire, which completely covers the area of the copper conductor and ensures the absence of an air gap. Due to the high quality of the copper conductor, the lowest contact resistance (0.1 Om) is achieved.

characteristics

main

Max power 150 W/m2 ± 10%
Working temperature 30-40 t, °С
Efficiency, % 92
unit of measurement linear meter
Cutting is a multiple of 20 cm in length
Width 1,0 m
Film thickness 0,338 mm
In a roll 100 m
Roll weight 48 kg
Type of film Standard, uncoated, striped
Type of heating Basic, additional
Guarantee 15 years
Lifetime 50 years
Composition Polyethylene terephthalate (PET), copper conductor, carbon (carbon bands), polyethylene (PE)

others

Collection Infrared floor under the laminate
Product of South Korea
Manufacturer HEAT PLUS
Guarantee 15 yeaes
Vendor code 310000

film structure heat plus

#
  • polyethylene terephthalate
  • copper tires
  • silver tires
  • carbon bands
  • polyethylene terephthalate

features of the infrared film heat plus

  • The material consists of 5 layers;
  • It is heated to 50 degrees;
  • Melting occurs at 160 degrees;
  • The sections, of which the film consists, have a width of 0.2 m.
  • On the material there are transparent areas that do not warm up. In these places, the heating cover is mounted to the surfaces;
  • Infrared film can be laid under any cover including under the screed;
  • The material has a high level of reliability at average market value.

technology of using infrared film spn-310-150

The heating material is arranged in such a way that heat can spread both upward and downward. In order to not waste energy in vain, a layer of thermal insulation (a substrate) is laid under the material. In our store you can buy branded thermal insulation materials, which you can see in the catalog of goods.

#
  • carbon conductor
  • polyethylene terephthalate
  • silver tire
  • copper bus

the heating film spn-310-150 is used for the following purposes

  • Arrangement of a warm floor;
  • Equipment of additional heating systems in the premises;
  • Heated walls, loggias, balconies;
  • Systems of heating of agricultural buildings, devices for growing plants;
  • Organization of heating in pavilions, shops, kiosks, garages, etc .;
  • Ceiling heating device .;

installation of infrared film spn-310-150

It is carried out in accordance with the instructions in the instructions that are attached to the material. For installation, the accompanying materials are used - thermal insulation substrate, protective coating, etc.

The thickness of all layers is different. It depends on the features of the finish material:

  • For parquet and laminate flooring - 0.45 cm.
  • Under the linoleum, carpet - 0.65 cm
  • Under the cement screed - 0,22 cm

materials required for installation of a floor heating system

when working with infrared film, safety measures should be followed

forbidden

  • To install at an air humidity above 70%, and also on wet surfaces
  • You can not use as a thermal insulation substrate, covered with foil of aluminum, metal
  • It is forbidden to mount an infrared film on the surface of metal, polystyrene foam, polystyrene, mineral wool, textiles
  • Make material kinks in the 0.5 m section by the value of the right angle or to the kink
  • It is impossible to impose an infrared film in two layers, to cross the cloths
  • Also, infrared film is prohibited from cutting in unauthorized places and placing heavy, sharp objects on it

The post Heat Plus Standart SPN-310-150 first appeared on Heat Plus.

]]> https://heatplus.ua/en/produkcija/infrakrasnaja-plenka/heat-plus-standart/heat-plus-standart-spn-310/heat-plus-standart-spn-310-150/feed/ 0 Heat Plus Standart SPN-310-120 https://heatplus.ua/en/produkcija/infrakrasnaja-plenka/heat-plus-standart/heat-plus-standart-spn-310/heat-plus-standart-spn-310-120/ https://heatplus.ua/en/produkcija/infrakrasnaja-plenka/heat-plus-standart/heat-plus-standart-spn-310/heat-plus-standart-spn-310-120/#respond Mon, 20 Aug 2018 18:18:41 +0000 http://heatplus.havrylovski.com.ua/?p=1514 Bestseller Bestseller Bestseller Bestseller Скачать инструкцию Infrared film SPN-310-120 - medium-temperature heating carbon film from HEAT PLUS ™. It is used as a heating element in systems of warm floors for the following types of floor coverings: laminate linoleum parquet board carpet cement screed +50°Сmax 120W/sq.m. 80 cmwidth 20 cmsection 220 V50 Hz other product […]

The post Heat Plus Standart SPN-310-120 first appeared on Heat Plus.

]]>
Bestseller
#
Bestseller
#
Bestseller
#
Bestseller
#
#
#
#
#

Infrared film SPN-310-120 - medium-temperature heating carbon film from HEAT PLUS ™. It is used as a heating element in systems of warm floors for the following types of floor coverings:

  • laminate
  • linoleum
  • parquet board
  • carpet
  • cement screed
  • +50°Сmax
  • 120W/sq.m.
  • 80 cmwidth
  • 20 cmsection
  • 220 V50 Hz

other product variants

Power, W/linear.

characteristics

Power, W/linear. 120
Max. heating temperature,°С 50
Collection Infrared floor under the laminate
Type Standart
Application of the carbon layer By bands
Operating voltage, V 220
Efficiency, % 92

other product variants

Power, W/linear.

characteristics

Power, W/m2. 120
Max. heating temperature,°С 50
Collection Infrared floor under the laminate
Type Standart
Application of the carbon layer By bands
Operating voltage, V 220
Efficiency, % 92

description

The minimum width in the standard film class is 100 cm. The maximum size in width in the class of standard films is used to heat the area of regular shapes. The use of a film of this standard width makes it possible to reduce the number of joints. The maximum film thickness is 150 W / m. This film is used to compensate for high heat losses in the room. The principle of the Heat Plus Standart heating film is based on the conversion of electrical energy into thermal infrared radiation. The key role in this process is played by the carbon layer, which serves as a converter of electricity to heat. The heating film does not heat the air, but the surrounding objects (floor, walls, furniture ...), which, subsequently, give their warmth to the air. During operation, the system does not burn oxygen, does not pollute the air and has a favorable effect on the microclimate in the room. People who are in the room where the Heat Plus Standart heating system is installed, always feel warm and comfortable thanks to not only the heat, but also the process of ionizing the air with film, due to the silver layer. The efficiency of a film-based heating system is more than 90% - this means that with the same energy consumption you get more heat than from any other heating systems. This is achieved by eliminating losses during the transfer of energy from the source to the heat radiator. Direct heating of the floor covering and surrounding objects, creates a comfortable temperature layer for human stay and reduces the need to heat the entire volume of air, in contrast to convection systems. Heat Plus infrared heating film consists of safe and environmentally friendly materials and is a film with a thickness of only 0.338 mm, consisting of 5 technological layers (unlike analogues, which consist of 2-3 layers). Carbon strips are united in sections of 20 cm in length. Carbon layer with a plasticizer is homogeneous, with great accuracy, applied to a PE (polyester) substrate. Overheating on films with a high specific power is eliminated. The most important part in the construction of the infrared film is the place of contact between the current carrying copper bus and the carbon heating layer. Reliable contact is provided by a silver tire, which completely covers the area of the copper conductor and ensures the absence of an air gap. Due to the high quality of the copper conductor, the lowest contact resistance (0.1 Om) is achieved.

characteristics

main

Max power 120 W/m2 ± 10%
Working temperature 25-30 t, °С
Efficiency, % 92
unit of measurement linear meter
Cutting is a multiple of 20 cm in length
Width 1,0 m
Film thickness 0,338 mm
In a roll 100 m
Roll weight 48 kg
Type of film Standard, uncoated, striped
Type of heating Basic, additional
Guarantee 15 years
Lifetime 50 years
Composition Polyethylene terephthalate (PET), copper conductor, carbon (carbon bands), polyethylene (PE)

others

Collection Infrared floor under the laminate
Product of South Korea
Manufacturer HEAT PLUS
Guarantee 15 yeaes
Vendor code 310000

film structure heat plus

#
  • polyethylene terephthalate
  • copper tires
  • silver tires
  • carbon bands
  • polyethylene terephthalate

features of the infrared film heat plus

  • The material consists of 5 layers;
  • It is heated to 50 degrees;
  • Melting occurs at 160 degrees;
  • The sections, of which the film consists, have a width of 0.2 m.
  • On the material there are transparent areas that do not warm up. In these places, the heating cover is mounted to the surfaces;
  • Infrared film can be laid under any cover including under the screed;
  • The material has a high level of reliability at average market value.

technology of using infrared film spn-310-120

The heating material is arranged in such a way that heat can spread both upward and downward. In order to not waste energy in vain, a layer of thermal insulation (a substrate) is laid under the material. In our store you can buy branded thermal insulation materials, which you can see in the catalog of goods.

#
  • carbon conductor
  • polyethylene terephthalate
  • silver tire
  • copper bus

the heating film spn-310-120 is used for the following purposes

  • Arrangement of a warm floor;
  • Equipment of additional heating systems in the premises;
  • Heated walls, loggias, balconies;
  • Systems of heating of agricultural buildings, devices for growing plants;
  • Organization of heating in pavilions, shops, kiosks, garages, etc .;
  • Ceiling heating device .;

installation of infrared film spn-310-120

It is carried out in accordance with the instructions in the instructions that are attached to the material. For installation, the accompanying materials are used - thermal insulation substrate, protective coating, etc.

The thickness of all layers is different. It depends on the features of the finish material:

  • For parquet and laminate flooring - 0.45 cm.
  • Under the linoleum, carpet - 0.65 cm
  • Under the cement screed - 0,22 cm

materials required for installation of a floor heating system

when working with infrared film, safety measures should be followed

forbidden

  • To install at an air humidity above 70%, and also on wet surfaces
  • You can not use as a thermal insulation substrate, covered with foil of aluminum, metal
  • It is forbidden to mount an infrared film on the surface of metal, polystyrene foam, polystyrene, mineral wool, textiles
  • Make material kinks in the 0.5 m section by the value of the right angle or to the kink
  • It is impossible to impose an infrared film in two layers, to cross the cloths
  • Also, infrared film is prohibited from cutting in unauthorized places and placing heavy, sharp objects on it

The post Heat Plus Standart SPN-310-120 first appeared on Heat Plus.

]]> https://heatplus.ua/en/produkcija/infrakrasnaja-plenka/heat-plus-standart/heat-plus-standart-spn-310/heat-plus-standart-spn-310-120/feed/ 0