fasteners and wires - Heat Plus https://heatplus.ua/en Infrared heating systems Wed, 10 Apr 2024 16:11:44 +0000 en-US hourly 1 https://wordpress.org/?v=6.5.2 https://heatplus.ua/wp-content/uploads/2018/10/favicon.png fasteners and wires - Heat Plus https://heatplus.ua/en 32 32 Clip-connector https://heatplus.ua/en/produkcija/soputstvujushhie-materialy/krepleniya-i-provoda/klipsa-konnektor/ https://heatplus.ua/en/produkcija/soputstvujushhie-materialy/krepleniya-i-provoda/klipsa-konnektor/#respond Thu, 20 Sep 2018 11:42:56 +0000 http://new.heatplus.ua/?p=2714 Bestseller Connecting Clip-Connector Heath Plus is used to connect an infrared film to an electrical circuit. Installed inside the film over the copper bus. Compressed by hand press. The clip provides electrical contact of the wire and copper bus, which allows to significantly reduce the time for installation of the warm floor system. characteristics Thickness […]

The post Clip-connector first appeared on Heat Plus.

]]>
Bestseller
#

Connecting Clip-Connector Heath Plus is used to connect an infrared film to an electrical circuit. Installed inside the film over the copper bus. Compressed by hand press.
The clip provides electrical contact of the wire and copper bus, which allows to significantly reduce the time for installation of the warm floor system.

characteristics

Thickness up to 5 mm
Width two blades 1 cm each
Height 2,7 cm
Packaging 500 items

characteristics

Thickness up to 5 mm
Width two blades 1 cm each
Height 2,7 cm
Packaging 500 items

description

Connector clip-connector Hit Plus of tin-plated copper alloy is used for the installation of a heating system to connect the infrared film to the electrical circuit.

One blade of the clip is installed inside the film over the copper bus, the second blade compresses the film from the outside for fixation. The clip is fixed with the help of a hand press or a manual vice.

The clip provides electrical contact of the wire and copper bus with low resistance and allows to significantly reduce the time for installation of the warm floor system.

characteristics

Length 2,7 сm
Width 1+1 сm
Thickness 3 mm
Temperature mode to +200 ℃

composition

Tinned copper alloy.

Application

Used to connect the infrared film to the electrical circuit.

Installation of infrared film Heath Plus

The post Clip-connector first appeared on Heat Plus.

]]> https://heatplus.ua/en/produkcija/soputstvujushhie-materialy/krepleniya-i-provoda/klipsa-konnektor/feed/ 0 Wire ПВ3-2,5 https://heatplus.ua/en/produkcija/soputstvujushhie-materialy/krepleniya-i-provoda/provod-pv-2-5/ https://heatplus.ua/en/produkcija/soputstvujushhie-materialy/krepleniya-i-provoda/provod-pv-2-5/#respond Thu, 20 Sep 2018 12:26:01 +0000 http://new.heatplus.ua/?p=2724 Bestseller The electric multicore wire ПВ3-2,5 with a cross-section of 2.5 mm is used to connect the infrared film with each other, with a thermoregulator and an electrical network. characteristics Diameter 2,5 mm Permissible load 5,9kW characteristics Diameter 2,5 mm Permissible load 5,9kW description The electric multicore wire ПВ3-2,5 with a cross-section of 2,5 mm […]

The post Wire ПВ3-2,5 first appeared on Heat Plus.

]]>
Bestseller
#

The electric multicore wire ПВ3-2,5 with a cross-section of 2.5 mm is used to connect the infrared film with each other, with a thermoregulator and an electrical network.

characteristics

Diameter 2,5 mm
Permissible load 5,9kW

characteristics

Diameter 2,5 mm
Permissible load 5,9kW

description

The electric multicore wire ПВ3-2,5 with a cross-section of 2,5 mm produced by "Odessa-Cable" is used to connect the infrared film with each other, with a thermostat and an electrical network.

For convenience of connection and avoidance of errors during installation, the wire is red and blue. Several copper cores provide the possibility of changing the geometry of the wire, bending it at a right angle without the risk of damage to the wire.

When installing, it is important to remember that the maximum load on the wire is 5.9 kW. It is better to make a margin of 30-40% of the power of the wire, for the case of overvoltage in the network and power surges.

characteristics

Diameter 2,5 mm
Permissible load 5,9kW

composition

Copper wire in isolation.

Application

Used to connect the infrared film to the electrical circuit.

Installation of infrared film Heath Plus

The post Wire ПВ3-2,5 first appeared on Heat Plus.

]]> https://heatplus.ua/en/produkcija/soputstvujushhie-materialy/krepleniya-i-provoda/provod-pv-2-5/feed/ 0 Wire ПВ3-1,5 https://heatplus.ua/en/produkcija/soputstvujushhie-materialy/krepleniya-i-provoda/provod-pv-3-1-5/ https://heatplus.ua/en/produkcija/soputstvujushhie-materialy/krepleniya-i-provoda/provod-pv-3-1-5/#respond Thu, 20 Sep 2018 11:50:42 +0000 http://new.heatplus.ua/?p=2718 Bestseller The electric multicore wire ПВ3-1,5 with a cross-section of 1.5 mm is used to connect the infrared film with each other, with a thermoregulator and an electrical network. characteristics Diameter 1,5 mm Permissible load 4,1kW characteristics Diameter 1,5 mm Permissible load 4,1kW description The electric multicore wire ПВ3-1,5 with a cross-section of 1.5 mm […]

The post Wire ПВ3-1,5 first appeared on Heat Plus.

]]>
Bestseller
#

The electric multicore wire ПВ3-1,5 with a cross-section of 1.5 mm is used to connect the infrared film with each other, with a thermoregulator and an electrical network.

characteristics

Diameter 1,5 mm
Permissible load 4,1kW

characteristics

Diameter 1,5 mm
Permissible load 4,1kW

description

The electric multicore wire ПВ3-1,5 with a cross-section of 1.5 mm produced by "Odessa-Cable" is used to connect the infrared film with each other, with a thermostat and an electrical network.

For convenience of connection and avoidance of errors during installation, the wire is red and blue. Several copper cores provide the possibility of changing the geometry of the wire, bending it at a right angle without the risk of damage to the wire.

When installing, it is important to remember that the maximum load on the wire is 4.1 kW. It is better to make a margin of 30-40% of the power of the wire, for the case of overvoltage in the network and power surges.

characteristics

Diameter 1,5 mm
Permissible load 4,1kW

composition

Copper wire in isolation.

Application

Used to connect the infrared film to the electrical circuit.

Installation of infrared film Heath Plus

The post Wire ПВ3-1,5 first appeared on Heat Plus.

]]> https://heatplus.ua/en/produkcija/soputstvujushhie-materialy/krepleniya-i-provoda/provod-pv-3-1-5/feed/ 0 Dowel-nail (mushroom) https://heatplus.ua/en/produkcija/soputstvujushhie-materialy/krepleniya-i-provoda/dyubel-gvozd/ https://heatplus.ua/en/produkcija/soputstvujushhie-materialy/krepleniya-i-provoda/dyubel-gvozd/#respond Thu, 20 Sep 2018 12:36:11 +0000 http://new.heatplus.ua/?p=2727 Bestseller The dowel-nail is used to fasten the reinforcing glass mesh during the laying of the film warm floor under the screed for heavy coatings (tiles, marble, etc.). characteristics Diameter 6 mm Length 40 mm Packaging 100 items characteristics Diameter 6 mm Length 40 mm Packaging 100 items Installation of infrared film Heath Plushttps://youtu.be/bprUiG9Wwjg

The post Dowel-nail (mushroom) first appeared on Heat Plus.

]]>
Bestseller
#

The dowel-nail is used to fasten the reinforcing glass mesh during the laying of the film warm floor under the screed for heavy coatings (tiles, marble, etc.).

characteristics

Diameter 6 mm
Length 40 mm
Packaging 100 items

characteristics

Diameter 6 mm
Length 40 mm
Packaging 100 items

Installation of infrared film Heath Plus

The post Dowel-nail (mushroom) first appeared on Heat Plus.

]]> https://heatplus.ua/en/produkcija/soputstvujushhie-materialy/krepleniya-i-provoda/dyubel-gvozd/feed/ 0