description

Infrared film SPN-305-110 - is a mid-temperature carbon heating element. It is produced by applying a carbon paste on polyethylene terephthalate.

The famous Heat Plus brand produces high-quality infrared film in South Korea. The products of this brand fully meet the standard requirements in the world. There is a certificate permitting the use of Heat Plus products in the Ukrainian territory. The film of the IR model SPN-305-110 is used for a warm floor. It is best suited for installation under parquet, linoleum, laminate, as well as for cement screed.

description

Infrared film PTC-305-110 - is a mid-temperature carbon heating element. It is produced by applying a carbon paste on polyethylene terephthalate.

The famous Heat Plus brand produces high-quality infrared film in South Korea. The products of this brand fully meet the standard requirements in the world. There is a certificate permitting the use of Heat Plus products in the Ukrainian territory. The film of the IR model PTC-305-110 is used for a warm floor. It is best suited for installation under parquet, linoleum, laminate, as well as for cement screed.

description

Infrared film SPN-303-60 - is a mid-temperature carbon heating element. It is produced by applying a carbon paste on polyethylene terephthalate.

The famous Heat Plus brand produces high-quality infrared film in South Korea. The products of this brand fully meet the standard requirements in the world. There is a certificate permitting the use of Heat Plus products in the Ukrainian territory. The film of the IR model SPN-303-60 is used for a warm floor. It is best suited for installation under parquet, linoleum, laminate, as well as for cement screed.

description

Infrared film SPN-303-067 - is a mid-temperature carbon heating element. It is produced by applying a carbon paste on polyethylene terephthalate.

The famous Heat Plus brand produces high-quality infrared film in South Korea. The products of this brand fully meet the standard requirements in the world. There is a certificate permitting the use of Heat Plus products in the Ukrainian territory. The film of the IR model SPN-303-067 is used for a warm floor. It is best suited for installation under parquet, linoleum, laminate, as well as for cement screed.

description

Heat Plus GPTC 410-220 is a premium film with ionizing coating, created using the technology of solid carbon deposition. Due to the multilayer structure it has an increased resistance to high temperatures.

This film is technologically designed for use under light coatings (laminate, linoleum, parquet, carpet, etc.) in places where heat is blocked. In other words, the Khaki film can be stacked even under stationary furniture, without the risk of damage to the film as a result of overheating.

The principle of the Heat Plus Sauna heating film is based on the conversion of electrical energy into thermal infrared radiation. The key role in this process is played by the carbon layer, which serves as a converter of electricity to heat.

The efficiency of a film-based heating system is more than 90% - this means that with the same energy consumption you get more heat than from any other heating systems. This is achieved by eliminating losses during the transfer of energy from the source to the heat radiator.

Direct heating of the floor covering and surrounding objects creates a comfortable temperature layer for human stay and reduces the need to heat the entire volume of air, in contrast to convection systems.

The heating film does not heat the air, but the surrounding objects (floor, walls, furniture ...), which, subsequently, give their warmth to the air. During operation, the system does not burn oxygen, does not pollute the air and has a favorable effect on the microclimate in the room.

People who are in the room where the Heat Plus heating system is installed, always feel warm and comfortable thanks to not only the heat, but also the process of ionizing the air with a film.

The premium class of films from TM Heat Plus is especially strong and highly efficient infrared films of the third generation, which significantly exceed, in all respects, the Standard class (striped infrared films of the first generation).

The heating carbon layer in Premium films is thicker and more ductile. And due to continuous application, the carbon layer is 2 times more efficient than that of the Standard film.

The film in its structure has more layers and is technologically more durable and reliable. Due to the multilayeredness and new production technology, it was possible to significantly improve the safety parameters of use. So the melting temperature of the film increased by 100-120 degrees. If you compare the Heat Plus Standart film - this figure is 160 degrees, and for Premium film - 260-280 degrees.

Heat Plus GPTC 410-220 infrared heating film consists of safe and environmentally friendly materials and is a film thickness of just 0.4 mm, consisting of 9 layers (unlike analogues, which consist of 2-3 layers).

Due to a special structure, both superheating on films with a high specific power and the effect of local heat blocking on the film itself are minimized. In simple words, placing furniture or other objects on a film does not do any harm to it.

The width of the Premium film is one meter. The design of the film allows you to divide it into two strips, each of 0.5 meters. Due to this, there is a flexible approach to the use of a half-meter film in narrow places or in heating appliances, or to fill the space with a meter film as much as possible.

The cut lines of the film are widthwise every 20 cm, but technologically it is possible to cut them on any stripes and even obliquely.

The most important part in the construction of the infrared film is the place of contact between the current carrying copper bus and the carbon heating layer. Reliable contact is provided by a silver tire, which completely covers the area of the copper conductor and ensures the absence of an air gap. Due to the high quality of the copper conductor, the lowest contact resistance (0.1 Ω) is reached, which minimizes the electrical losses at the contacts.

description

Heat Plus GPTC 405-110 is a premium film with ionizing coating, created using the technology of solid carbon deposition. Due to the multilayer structure it has an increased resistance to high temperatures.

This film is technologically designed for use under light coatings (laminate, linoleum, parquet, carpet, etc.) in places where heat is blocked. In other words, the Khaki film can be stacked even under stationary furniture, without the risk of damage to the film as a result of overheating.

The principle of the Heat Plus Sauna heating film is based on the conversion of electrical energy into thermal infrared radiation. The key role in this process is played by the carbon layer, which serves as a converter of electricity to heat.

The efficiency of a film-based heating system is more than 90% - this means that with the same energy consumption you get more heat than from any other heating systems. This is achieved by eliminating losses during the transfer of energy from the source to the heat radiator.

Direct heating of the floor covering and surrounding objects creates a comfortable temperature layer for human stay and reduces the need to heat the entire volume of air, in contrast to convection systems.

The heating film does not heat the air, but the surrounding objects (floor, walls, furniture ...), which, subsequently, give their warmth to the air. During operation, the system does not burn oxygen, does not pollute the air and has a favorable effect on the microclimate in the room.

People who are in the room where the Heat Plus heating system is installed, always feel warm and comfortable thanks to not only the heat, but also the process of ionizing the air with a film.

The premium class of films from TM Heat Plus is especially strong and highly efficient infrared films of the third generation, which significantly exceed, in all respects, the Standard class (striped infrared films of the first generation).

The heating carbon layer in Premium films is thicker and more ductile. And due to continuous application, the carbon layer is 2 times more efficient than that of the Standard film.

The film in its structure has more layers and is technologically more durable and reliable. Due to the multilayeredness and new production technology, it was possible to significantly improve the safety parameters of use. So the melting temperature of the film increased by 100-120 degrees. If you compare the Heat Plus Standart film - this figure is 160 degrees, and for Premium film - 260-280 degrees.

Heat Plus GPTC 405-110 infrared heating film consists of safe and environmentally friendly materials and is a film thickness of just 0.4 mm, consisting of 9 layers (unlike analogues, which consist of 2-3 layers).

Due to a special structure, both superheating on films with a high specific power and the effect of local heat blocking on the film itself are minimized. In simple words, placing furniture or other objects on a film does not do any harm to it.

The width of the Premium film is one meter. The design of the film allows you to divide it into two strips, each of 0.5 meters. Due to this, there is a flexible approach to the use of a half-meter film in narrow places or in heating appliances, or to fill the space with a meter film as much as possible.

The cut lines of the film are widthwise every 20 cm, but technologically it is possible to cut them on any stripes and even obliquely.

The most important part in the construction of the infrared film is the place of contact between the current carrying copper bus and the carbon heating layer. Reliable contact is provided by a silver tire, which completely covers the area of the copper conductor and ensures the absence of an air gap. Due to the high quality of the copper conductor, the lowest contact resistance (0.1 Ω) is reached, which minimizes the electrical losses at the contacts.

description

Heat Plus APN-405-110 Gold is a premium film with ionizing coating, created using the technology of solid carbon deposition. Due to the multilayer structure it has an increased resistance to high temperatures. This film is technologically designed for use under light coatings (laminate, linoleum, parquet, carpet, etc.) in places where heat is blocked. In other words, the Khaki film can be stacked even under stationary furniture, without the risk of damage to the film as a result of overheating. The principle of the Heat Plus Sauna heating film is based on the conversion of electrical energy into thermal infrared radiation. The key role in this process is played by the carbon layer, which serves as a converter of electricity to heat. The efficiency of a film-based heating system is more than 90% - this means that with the same energy consumption you get more heat than from any other heating systems. This is achieved by eliminating losses during the transfer of energy from the source to the heat radiator. Direct heating of the floor covering and surrounding objects creates a comfortable temperature layer for human stay and reduces the need to heat the entire volume of air, in contrast to convection systems. The heating film does not heat the air, but the surrounding objects (floor, walls, furniture ...), which, subsequently, give their warmth to the air. During operation, the system does not burn oxygen, does not pollute the air and has a favorable effect on the microclimate in the room. People who are in the room where the Heat Plus heating system is installed, always feel warm and comfortable thanks to not only the heat, but also the process of ionizing the air with a film. The premium class of films from TM Heat Plus is especially strong and highly efficient infrared films of the third generation, which significantly exceed, in all respects, the Standard class (striped infrared films of the first generation). The heating carbon layer in Premium films is thicker and more ductile. And due to continuous application, the carbon layer is 2 times more efficient than that of the Standard film. The film in its structure has more layers and is technologically more durable and reliable. Due to the multilayeredness and new production technology, it was possible to significantly improve the safety parameters of use. So the melting temperature of the film increased by 100-120 degrees. If you compare the Heat Plus Standart film - this figure is 160 degrees, and for Premium film - 260-280 degrees. Heat Plus APN-405-110 Gold infrared heating film consists of safe and environmentally friendly materials and is a film thickness of just 0.4 mm, consisting of 9 layers (unlike analogues, which consist of 2-3 layers). Due to a special structure, both superheating on films with a high specific power and the effect of local heat blocking on the film itself are minimized. In simple words, placing furniture or other objects on a film does not do any harm to it. The width of the Premium film is one meter. The design of the film allows you to divide it into two strips, each of 0.5 meters. Due to this, there is a flexible approach to the use of a half-meter film in narrow places or in heating appliances, or to fill the space with a meter film as much as possible. The cut lines of the film are widthwise every 20 cm, but technologically it is possible to cut them on any stripes and even obliquely. The most important part in the construction of the infrared film is the place of contact between the current carrying copper bus and the carbon heating layer. Reliable contact is provided by a silver tire, which completely covers the area of the copper conductor and ensures the absence of an air gap. Due to the high quality of the copper conductor, the lowest contact resistance (0.1 Ω) is reached, which minimizes the electrical losses at the contacts.

description

Infrared film SPN-305-225 - is a mid-temperature carbon heating element. It is produced by applying a carbon paste on polyethylene terephthalate.

The famous Heat Plus brand produces high-quality infrared film in South Korea. The products of this brand fully meet the standard requirements in the world. There is a certificate permitting the use of Heat Plus products in the Ukrainian territory. The film of the IR model SPN-305-225 is used for a warm floor. It is best suited for installation under parquet, linoleum, laminate, as well as for cement screed.

description

Infrared film SPN-306-300 - is a mid-temperature carbon heating element. It is produced by applying a carbon paste on polyethylene terephthalate.

The famous Heat Plus brand produces high-quality infrared film in South Korea. The products of this brand fully meet the standard requirements in the world. There is a certificate permitting the use of Heat Plus products in the Ukrainian territory. The film of the IR model SPN-306-300 is used for a warm floor. It is best suited for installation under parquet, linoleum, laminate, as well as for cement screed.

description

Infrared film SPN-210-150 - is a mid-temperature carbon heating element. It is produced by applying a carbon paste on polyethylene terephthalate.

The famous Heat Plus brand produces high-quality infrared film in South Korea. The products of this brand fully meet the standard requirements in the world. There is a certificate permitting the use of Heat Plus products in the Ukrainian territory. The film of the IR model SPN-210-150 is used for a warm floor. It is best suited for installation under parquet, linoleum, laminate, as well as for cement screed.