Heat Plus Heating Textile AFN-2009-216

description

Heating Textile is a protected film of the fourth generation of an innovative structure. The basis of the film is a grid treated with electroconductive carbon. Fiberglass yarn and polymer thread are interwoven into the mesh. This structure provides not only high strength and reliability, but also increased efficiency, as well as lower power consumption. The maximum power of the film is 216 W / m. allows you to effectively heat rooms with large heat losses and use a film in heating appliances. The current-carrying copper thread is very thin (0.27 mm in diameter) and has a continuous path through the entire length of the fabric. The patented method allows to increase the number of woven metallic conductor threads into carbon fabric, thanks to this, the total area of the conductor is 2.5 mm2. Copper conductor thread perfectly integrates with carbon fabric, using textile processes. Direct heating of the floor covering and surrounding objects creates a comfortable temperature layer for human stay and reduces the need to heat the entire volume of air, in contrast to convection systems. The heating film does not heat the air, but the surrounding objects (floor, walls, furniture ...), which, subsequently, give their warmth to the air. During operation, the system does not burn oxygen, does not pollute the air and has a favorable effect on the microclimate in the room. People who are in the room where the Heat Plus heating system is installed, always feel warm and comfortable thanks to not only the heat, but also the process of ionizing the air with a film. The class of films Heating Textiles from TM Heat Plus are especially strong and highly efficient infrared films of the fourth generation, which significantly exceed, in all respects, other classes of Heat Plus films and analogues on the market of infrared films. The film in its structure has more layers and is technologically more durable and reliable. Due to the multilayeredness and new production technology, based on the intertwining of yarn from fiberglass and polymer yarn, it was possible to significantly improve the safety parameters of use. Due to good thermal conductivity and heat resistance, Heating Textile is ideally suited for use as a heating medium. At the same time, the fibers provide a high degree of flexibility, and the heating circuits can be applied in different geometries on the carrier material. Due to the special structure, overheating and the effect of local heat blocking on the film itself are minimized. In simple words, placing furniture or other objects on a film does not do any harm to it. Moreover, this film is designed for work in anti-icing and snow melting systems. It can be mounted and used under paving slabs, concrete, or asphalt. The width of the film Textile is 90 cm. Unlike the Sauna and Premium films, this film is not divided into two strips. The cut lines of the film are widthwise every 20 cm, but technologically it is possible to cut them on any stripes and even obliquely. High power, dimensional flexibility, film flexibility, efficiency and economy, increased strength and reliability of the film will allow it to be used for rooms with a high heat loss rate, in heating appliances, mobile heating and other technological solutions that can not be solved with films of previous generations (Standard, Premium, Sauna). The most important part in the construction of the infrared film is the place of contact between the current carrying copper bus and the carbon heating layer. Reliable contact is provided by a silver tire, which completely covers the area of the copper conductor and ensures the absence of an air gap. Due to the high quality of the copper conductor, the lowest contact resistance (0.1 Ω) is reached, which minimizes the electrical losses at the contacts.