The insulation tape is used for the purpose of electro- and waterproofing the places of electrical connection and the free ends of copper busbars. Insulating tape is heat-resistant, with waterproofing effect.
The tape consumes one insulation point from 15 cm. To isolate the ends of a continuous film, it is necessary to take a tape along the width of the film on each side.
characteristics
| Thickness | 2 mm |
| Width | 5 cm |
| Roll | 50 m |
characteristics
| Thickness | 2 mm |
| Width | 5 cm |
| Roll | 50 m |
description
Insulating tape Heath Plus is an adhesive tape used to insulate infrared film in heating systems and warm floors.
The main application is the insulation of the contact points of the electrical part of the film and the wiring (clips or soldering points to the copper bus). Insulating tape has increased heat resistance in comparison with conventional insulation tapes.
When isolating the contact points, it is glued over the butyl tape to fix the butyl and additional insulation of the contacts.
At one contact point, from 15 centimeters of insulation tape is used for high-quality and reliable insulation. To isolate the ends of a continuous film, it is necessary to take the tape along the width of the film on each side.
characteristics
| Length | 50 m |
| Width | 5 cm |
| Thickness | 0,5 mm |
| Temperature mode | to +120 ℃ |
composition
Synthetic insulating material.
Application
For insulation of contact points, loose ends of copper busbars and end faces of a film with a continuous coating.
Suitable for all types of Heat Plus infrared film.
