Mounting grid is used for reinforcement of bulk floors (screeds), to protect surfaces from deformation and cracks.
The mesh is laid on top of all technological layers of laying the infrared warm floor Heat Plus with a margin around the perimeter of 10-15 cm and is attached with dowels.
characteristics
| Thickness | 1,5 mm |
| Width | 1,0 m |
| Roll | 50 m |
characteristics
| Thickness | 1,5 mm |
| Width | 1,0 m |
| Roll | 50 m |
description
A glass mesh is used when installing an infrared film under the screed for heavy coatings.
The main function is reinforcement of the filler floor to avoid cracks and deformation of the floor covering.
The grid is laid on top of the pie from insulating materials, infrared film, polyethylene sleeve, with a margin around the perimeter of 10-15 cm.
The mounting grid is fixed with dowels and filled with a screed.
characteristics
| Width | 1,0 m |
| Length | 50 m |
| Thickness | 1,5 mm |
| Temperature mode | from - 50 to +150 ℃ |
composition
Fiberglass.
Stacking
Under the screed to protect against deformation and cracks.
Fits stacked over a pie of the warm floor and fixed with dowels.
