infrared film

Home Products infrared film


Heat Plus is a heating element used in conjunction with other Heath Plus products to create electrical heating systems, film infrared warm floors, local heating systems, heating appliances, anti-ice and snow melt systems and other purposes. The efficiency of the heating system based on infrared film is more than 90%. A high indicator is achieved not only with the help of infrared heating, but also by eliminating losses during the transfer of energy from the source to the radiator of heat.

Infrared film, in combination with other materials TM Heat Plus, is ideal for laying both under light coatings (linoleum, laminate, carpet, parquet, etc.), and for laying under heavy coatings (tiles, marble, etc .). People who are in the room where the Heat Plus Standart heating system is installed, always feel warm and comfortable thanks to not only the heat, but also the process of ionizing the air with film, due to the silver layer. The efficiency of a film-based heating system is more than 90% - this means that with the same energy consumption you get more heat than from any other heating systems. This is achieved by eliminating losses during the transfer of energy from the source to the heat radiator. Direct heating of the floor covering and surrounding objects, creates a comfortable temperature layer for human stay and reduces the need to heat the entire volume of air, in contrast to convection systems. Heat Plus infrared heating film consists of safe and environmentally friendly materials and is a film with a thickness of only 0.338 mm, consisting of 5 technological layers (unlike analogues, which consist of 2-3 layers). Carbon strips are united in sections of 20 cm in length. Carbon layer with a plasticizer is homogeneous, with great accuracy, applied to a PE (polyester) substrate. Overheating on films with a high specific power is eliminated. The most important part in the construction of the infrared film is the place of contact between the current carrying copper bus and the carbon heating layer. Reliable contact is provided by a silver tire, which completely covers the area of ​​the copper conductor and ensures the absence of an air gap. Due to the high quality of the copper conductor, the lowest contact resistance (0.1 Om) is achieved.

stowage technologies

infrared film for different coatings

  • still have questions?

    write to us, and we will reply

  • Kiev, Marii Kapnist str. 10a.

    044 502 03 56 (tel/fax)

    Wholesale department
    067 473 84 76

    Retail department
    099 722 89 24

    office@heatplus.ua