Heat Plus DC-12V-30

Home Products infrared film Heat Plus Standart Heat Plus DC-12V-30
Recommended retail price498
in stock
#
in stock
#
in stock
#
in stock
#
in stock
#
in stock
#
#
#
#
#
#
#

Infrared film DC-12V-30 - medium-temperature heating carbon film from HEAT PLUS ™. It is used as a heating element in vehicles, fire and explosion hazardous objects, etc.

  • +35°Сmax
  • 150W/sq.m.
  • 30 cmwidth
  • 100 cmsection
  • 12-48 V50 Hz

characteristics

Power, W/linear. 50
Max. heating temperature,°С 35
Collection Infrared floor under the laminate
Type Standart
Application of the carbon layer By bands
Operating voltage, V 12-48
Efficiency, % 92

characteristics

Power, W/m2. 60
Max. heating temperature,°С 40
Collection Infrared floor under the laminate
Type Standart
Application of the carbon layer By bands
Operating voltage, V 220
Efficiency, % 92

description

Heating film 12 volt is a unique product on the Ukrainian market from the Hit Plus trademark. The uniqueness of the infrared film 12v is that it can work both from AC and DC networks, as well as stable operation of the product in the voltage range of 12 - 48 volts.

Pay attention to the structure of this IR film. It is different from the usual striped or premium films. On both sides, along the length of the roll, there are conductive copper tires. At the same time, there are silver conductive bars running across the film, approximately every 7 cm. On this basis, the 12 V infrared film can be cut from the roll in increments of ≈ 7 cm. Methods of installation, operating rules and methods of connection of this film are similar to other models.

characteristics

main

Max power 150 W/m2 ± 10%
Working temperature 35 t, °С
Efficiency, % 92
unit of measurement linear meter
Width 0,3 m
Film thickness 0,338 mm
In a roll 100 m
Roll weight 15 kg
Type of film Low-voltage
Type of heating Basic, additional
Guarantee 15 years
Lifetime 50 years
Composition Polyethylene terephthalate (PET), copper conductor, carbon (carbon bands), polyethylene (PE)

others

Collection Low-voltage
Product of South Korea
Manufacturer HEAT PLUS
Guarantee 15 yeaes
Vendor code 30312

film structure heat plus

#
  • polyethylene terephthalate
  • copper tires
  • silver tires
  • carbon bands
  • polyethylene terephthalate

features of the infrared film heat plus

  • The material consists of 5 layers;
  • It is heated to 50 degrees;
  • Melting occurs at 160 degrees;
  • The sections, of which the film consists, have a width of 0.2 m.
  • On the material there are transparent areas that do not warm up. In these places, the heating cover is mounted to the surfaces;
  • Infrared film can be laid under any cover including under the screed;
  • The material has a high level of reliability at average market value.

technology of using infrared film DC-12V-30

On both sides, along the length of the roll, there are conductive copper bars. At the same time, silver conductive bars run across the film, approximately every 7 cm. On this basis, the 12 V infrared film can be cut from the roll in increments of ≈ 7 cm.

#
  • carbon conductor
  • polyethylene terephthalate
  • silver tire
  • copper bus

the heating film DC-12V-30 is used for the following purposes

  • Arrangement of a warm floor;
  • Equipment of additional heating systems in the premises;
  • Heated walls, loggias, balconies;
  • Systems of heating of agricultural buildings, devices for growing plants;
  • Organization of heating in pavilions, shops, kiosks, garages, etc .;
  • Ceiling heating device .;

installation of infrared film DC-12V-30

It is carried out in accordance with the instructions in the instructions that are attached to the material. For installation, the accompanying materials are used - thermal insulation substrate, protective coating, etc.

The thickness of all layers is different. It depends on the features of the finish material:

  • For parquet and laminate flooring - 0.45 cm.
  • Under the linoleum, carpet - 0.65 cm
  • Under the cement screed - 0,22 cm

materials required for installation of a floor heating system

when working with infrared film, safety measures should be followed

forbidden

  • To install at an air humidity above 70%, and also on wet surfaces
  • You can not use as a thermal insulation substrate, covered with foil of aluminum, metal
  • It is forbidden to mount an infrared film on the surface of metal, polystyrene foam, polystyrene, mineral wool, textiles
  • Make material kinks in the 0.5 m section by the value of the right angle or to the kink
  • It is impossible to impose an infrared film in two layers, to cross the cloths
  • Also, infrared film is prohibited from cutting in unauthorized places and placing heavy, sharp objects on it

related materials

  • still have questions?

    write to us, and we will reply

    • Kiev, Marii Kapnist str. 10a.

    044 502 03 56 (tel/fax)

    Wholesale department
    067 473 84 76

    Retail department
    099 722 89 24

    office@heatplus.ua