Infrared film SPN-303-067 - medium-temperature heating carbon film from HEAT PLUS ™. It is used as a heating element in systems of warm floors for the following types of floor coverings:
- laminate
- linoleum
- parquet board
- carpet
- cement screed
- +50°Сmax
- 220W/sq.m.
- 30 cmwidth
- 25 cmsection
- 220 V50 Hz
characteristics
| Power, W/linear. | 67 |
| Max. heating temperature,°С | 50 |
| Collection | Infrared floor under the laminate |
| Type | Standart |
| Application of the carbon layer | By bands |
| Operating voltage, V | 220 |
| Efficiency, % | 92 |
characteristics
| Power, W/m2. | 220 |
| Max. heating temperature,°С | 50 |
| Collection | Infrared floor under the laminate |
| Type | Standart |
| Application of the carbon layer | By bands |
| Operating voltage, V | 220 |
| Efficiency, % | 92 |
description
Infrared film SPN-303-067 - is a mid-temperature carbon heating element. It is produced by applying a carbon paste on polyethylene terephthalate.
The famous Heat Plus brand produces high-quality infrared film in South Korea. The products of this brand fully meet the standard requirements in the world. There is a certificate permitting the use of Heat Plus products in the Ukrainian territory. The film of the IR model SPN-303-067 is used for a warm floor. It is best suited for installation under parquet, linoleum, laminate, as well as for cement screed.
characteristics
main
| Max power | 220 W/m2 ± 10% |
| Working temperature | 50 t, °С |
| Efficiency, % | 92 |
| unit of measurement | linear meter |
| Cutting | is a multiple of 25 cm in length |
| Width | 0,3 m |
| Film thickness | 0,338 mm |
| In a roll | 150 m |
| Roll weight | 21 kg |
| Type of film | Standard, uncoated, striped |
| Type of heating | Basic, additional |
| Guarantee | 15 years |
| Lifetime | 50 years |
| Composition | Polyethylene terephthalate (PET), copper conductor, carbon (carbon bands), polyethylene (PE) |
others
| Collection | Infrared floor under the laminate |
| Product of | South Korea |
| Manufacturer | HEAT PLUS |
| Guarantee | 15 yeaes |
| Vendor code | 303067 |
film structure heat plus
- polyethylene terephthalate
- copper tires
- silver tires
- carbon bands
- polyethylene terephthalate
features of the infrared film heat plus
- The material consists of 5 layers;
- It is heated to 50 degrees;
- Melting occurs at 160 degrees;
- The sections, of which the film consists, have a width of 0.25 m.
- On the material there are transparent areas that do not warm up. In these places, the heating cover is mounted to the surfaces;
- Infrared film can be laid under any cover including under the screed;
- The material has a high level of reliability at average market value.
technology of using infrared film SPN-303-067
The heating material is arranged in such a way that heat can spread both upward and downward. In order to not waste energy in vain, a layer of thermal insulation (a substrate) is laid under the material. In our store you can buy branded thermal insulation materials, which you can see in the catalog of goods.
- carbon conductor
- polyethylene terephthalate
- silver tire
- copper bus
the heating film SPN-303-067 is used for the following purposes
- Arrangement of a warm floor;
- Equipment of additional heating systems in the premises;
- Heated walls, loggias, balconies;
- Systems of heating of agricultural buildings, devices for growing plants;
- Organization of heating in pavilions, shops, kiosks, garages, etc .;
- Ceiling heating device .;
installation of infrared film SPN-303-067
It is carried out in accordance with the instructions in the instructions that are attached to the material. For installation, the accompanying materials are used - thermal insulation substrate, protective coating, etc.
The thickness of all layers is different. It depends on the features of the finish material:
- For parquet and laminate flooring - 0.45 cm.
- Under the linoleum, carpet - 0.65 cm
- Under the cement screed - 0,22 cm
materials required for installation of a floor heating system
for laminate, parquet board
when working with infrared film, safety measures should be followed
forbidden
- To install at an air humidity above 70%, and also on wet surfaces
- You can not use as a thermal insulation substrate, covered with foil of aluminum, metal
- It is forbidden to mount an infrared film on the surface of metal, polystyrene foam, polystyrene, mineral wool, textiles
- Make material kinks in the 0.5 m section by the value of the right angle or to the kink
- It is impossible to impose an infrared film in two layers, to cross the cloths
- Also, infrared film is prohibited from cutting in unauthorized places and placing heavy, sharp objects on it
