Adhesive pigmented primer with the addition of quartz sand, is used to install Heath Plus heating systems under ceramic coatings for glue compounds.
Ground Concrete-Contact is used for pretreatment of the surface of infrared film - creating a rough texture, for the subsequent installation of ceramic coatings.
Appearance - a solution on a water basis with quartz sand of pink color.
characteristics
| The rate of consumption | 0,3-0,5 kg / m² |
| Packing | 1, 3, 6, 12 кг |
characteristics
| The rate of consumption | 0,3-0,5 kg / m² |
| Packing | 1, 3, 6, 12 кг |
description
Adhesive (adhesive) pigmented primer with the addition of quartz sand. It is intended for preliminary processing of surfaces of metal embedded parts before applying plaster and cement plasters on them. Resistant to the influence of aggressive atmospheric phenomena, sunlight, alkaline compounds. It can be used as a fastening layer for gluing by means of "tile to tile". Drying time 6 hours.
Concrete-Contact is used to install Heath Plus heating systems under ceramic coatings for adhesive compounds.
After gluing the film on the screed with acrylic glue or mastic and drying the adhesive composition, apply a solution of Concrete-Contact on the entire surface of the film with a margin of 10 cm around the perimeter.
After the primer has dried (6-12 hours), a rough texture of adhered quartz sand is formed on the surface of the film. This texture significantly improves the adhesion of the tile adhesive to the surface of the film.
After the glue and soil have dried completely, you can proceed to install the floor covering.
characteristics
| The rate of consumption | 0,3-0,5 kg / m2 |
| Packing | 1.4, 2.5, 5 ,14 кг |
| Temperature mode | from -40 to +100℃ |
| Setting time | 6-12 hours |
| Risk class | Безпечний |
composition
Pigmented water-based primer with quartz sand
Application
Used to create a rough texture on the surface of the infrared film, for installation under ceramic coatings for adhesive compositions.
