The electric multicore wire ПВ3-2,5 with a cross-section of 2.5 mm is used to connect the infrared film with each other, with a thermoregulator and an electrical network.
characteristics
| Diameter | 2,5 mm |
| Permissible load | 5,9kW |
characteristics
| Diameter | 2,5 mm |
| Permissible load | 5,9kW |
description
The electric multicore wire ПВ3-2,5 with a cross-section of 2,5 mm produced by "Odessa-Cable" is used to connect the infrared film with each other, with a thermostat and an electrical network.
For convenience of connection and avoidance of errors during installation, the wire is red and blue. Several copper cores provide the possibility of changing the geometry of the wire, bending it at a right angle without the risk of damage to the wire.
When installing, it is important to remember that the maximum load on the wire is 5.9 kW. It is better to make a margin of 30-40% of the power of the wire, for the case of overvoltage in the network and power surges.
characteristics
| Diameter | 2,5 mm |
| Permissible load | 5,9kW |
composition
Copper wire in isolation.
Application
Used to connect the infrared film to the electrical circuit.
